100 • Management Functions SAM4s SPS-300 Operator's & Programming Manual v1.34
5. If IRC is SELECT, then the register selection displays:
X REPORT OPTIONS
RPT# : FINANCIAL
1. TYPE 0
0:DAILY 1:PERIOD
2. 0:PRINT 1:DISPLAY 0
3. IRC 2
0:STANDALONE
# 1Y 2N 3N 4N 5N 6N 7N 8N
6. Press the YES/NO key at each register # to select whether you wish to include
each register in the consolidated report. Press CASH after each selection. After
the last selection, the report will start.
Field Description
TYPE Select X1 or X2 if available for the selected report.
IRC
Select STANDALONE, ALL, or SELECT if available
for the selected report. If SELECT, the screen will
prompt for selection of registers - the screen will
initially show the registers available from the from/to
IRC register programming, for example if the IRC
range is from 1 to 3, then the selection will default to:
1 2 3 4 5 6 7 8
Y Y Y N N N N N
OUTPUT Select PRINT or DISPLAY output.
To Next Page
Loading...
