Sam4s SPS-300 Series - Training Mode

SAM4s SPS-300 Operator's & Programming Manual v1.34 Management Functions • 99
2. If you know the number of the report you wish to generate, enter the number and
press CASH. If you wish to look up the report number, press CASH to view the
X Report List, then press the number of the report you wish to generate.
X REPORT LIST P1
0.FINANCIAL
1.TIME
2.PLU
3.CLERK
4.GROUPS
5.DAY
6.STOCK
Press PAGE DOWN to view the second page of reports:
X REPORT LIST P2
7.CLERK TIME
8.OPEN CHECK
9.DRAWER TOTALS
00.PLU ZERO SALE
DEC. MIX & MATCH
3. When a report is selected, the X REPORT OPTIONS screen displays:
X REPORT OPTIONS
RPT# : FINANCIAL
1. TYPE 0
0:DAILY 1:PERIOD
2. 0:PRINT 1:DISPLAY 0
3. IRC 0
0:STANDALONE
1:ALL 2:SELECT
4. Select the TYPE (DAILY or PERIOD), PRINT or DISPLAY, and the IRC
configuration. Refer to the explanations in the table below. Press CASH after
each selection. After the last selection, the report will start.