Sam4s SPS-300 Series - Keyboards

SAM4s SPS-300 Operator's & Programming Manual v1.34 Introduction • 21
Control Lock
The control lock has 7 positions, accessed with 5 keys. Each ECR is shipped with two full
sets of keys.
VOID Use to void (correct) items outside of a sale.
OFF The register is inoperable.
REG Use for normal registrations.
X Use to read register reports.
Z Use to read register reports and reset totals to zero.
P Use to program the register.
S The S position is a hidden position reserved for
dealer access.
Before performing any operations in Register Mode, a clerk must be signed on. See “Clerk
Sign-On/Sign-Off” for a description of clerk operations.
Control Keys
All SPS-300 series models include two sets of keys that may be used to access the following
control lock positions.
Key Positions Accessible
REG OFF, REG
VD VOID, OFF, REG, X
Z VOID, OFF, REG, X, Z
P VOID, OFF, REG, X, Z, P
C ALL POSITIONS
Note: Keys may be removed from the control lock in the OFF or REG positions.
VOID
P
Z
X
REG
OFF
S