106 • Management Functions SAM4s SPS-300 Operator's & Programming Manual v1.34
will you will be presented with the option to print or save the report to SD
Open Check (IRC)
CAUTION: SPS-300 Series ECRs do not share access to a common check file.
This operation allows access to the individual check files that are located in separate SPS-300
ECRs. This information is not consolidated, but rather reported separately for each register.
1. From the MANAGER MODE menu press 9 to report open check by IRC. The
display returns the message shown below:
MANAGER MODE 
7.E.J. OPERATION
8.NOT FOUND PLU
9.OPE███████████████████████
â–ˆ SD : 0 / PRINT : 1 â–ˆ
███████████████████████
3. Press 1 to print the report. The check file will print sequentially for each ECR in
the system, or
Press 0 to save the reports to SD. A file will be saved for each register. Use the
PC Utility to view the file.
To Next Page
Loading...
