SAM4s SPS-300 Operator's & Programming Manual v1.34 Introduction • 15
Display
The SPS-300 features an eight-line backlit LCD display.
Press PAGE DOWN in REG mode to increase the intensity of the back light.
Press PAGE UP in REG mode to decrease the intensity of the back light.
The color of the backlight can be changed through system option program settings.
As items are registered, they will be listed on the next available line. The quantity
information will update when multiples of the same item are entered. Additional information
and error messages will display as appropriate, and may be accompanied by an error tone.
Programming options also display. In most cases, you can make changes to your program
without consulting this manual by simply following the program menus.
REG
Note: The “CLOSED” message will display if a clerk is not signed on.
REGISTER MODE
██████████
█ CLOSED █
██████████
To Next Page
Loading...
