Sam4s SPS-300 Series - Postamble

SAM4s SPS-300 Operator's & Programming Manual v1.34 Program Mode Programming • 227
PAID OUT 1-3
1. Press one of the PAID OUT keys to view the paid out function key options:
PO #1 KEY PROGRAMMING
DESC : PO1 
KEY HALO 0.00
(0 : NO LIMIT)
KEY DISABLE N
UNDER MGR CONTROL N
COMPULSORY VALID N
DISABLE TIP INPUT N
2. Press CASH from the last field to return to the FUNCTION KEY PROGRAM
screen, or press CLEAR at any time to return to the FUNCTION KEY
PROGRAM screen without saving changes.
PAID OUT 1-3 Key Program Notes
Option Entry Description
DESC
Alpha
numeric
12 character
You can program a unique descriptor. The default descriptors
are PO 1-3.
HALO
7 digit
amount
You can limit errors by setting the maximum amount that can
be used with this function. "0" means that there is no entry
limit.
KEY DISABLE Y or N Select Y to disable this function.
UNDER MGR
CONTROL
Y or N
Select Y if you do not want the operator use this function in
REGISTER mode. When selected, the function is allowed
only in the X control lock position.
COMPULSORY
VALIDATION
Y or N
Choose Y to enforce validation if an optional printer with
validation capability is connected to an RS-232C port.
DISABLE TIP
INPUT
Y or N Option available at firmware version 1.038 or later.