196 • Program Mode Programming SAM4s SPS-300 Operator's & Programming Manual v1.34
4. Press CASH from the last field or press PAGE DOWN to view the last page of
% function key options:
%1 PROGRAMMING 
COMPULSORY VALID N
5. Press CASH from the last field to return to the FUNCTION KEY PROGRAM
screen, or press CLEAR at any time to return to the FUNCTION KEY
PROGRAM screen without saving changes.
%1 -%5 Function Options
Option Entry Description
DESC
Alpha
numeric
12 character
You can program a unique descriptor. The default
descriptors are % 1-4.
AMOUNT:Y %:N Y or N
Select Y if you wish this key to apply an amount (as in a
coupon). Select N if you wish this key to apply a
percentage (as in a discount or surcharge).
RATE 5 digit
If the function is an amount, enter an amount from 0 to
999.99. If not zero, the amount will be the preset coupon
amount. If the function is a percentage, enter a percentage
from 0 to 99.999%. If not zero, the percentage will be the
preset percentage
KEY DISABLE Y or N Select Y to disable this function.
UNDER MGR
CONTROL
Y or N
Select Y if you do not want the operator use this function
in REGISTER mode. When selected, the function is
allowed only in the X control lock position.
OPEN:Y PRESET:N Y or N
Select Y if you with the amount or percentage to be entered
by the operator; select N if you with the amount or
percentage to be preset.
SALE:Y ITEM:N Y or N
Select Y if you wish the amount or percentage to apply to
the sale total. Select N if you wish the amount or
percentage to apply to an item.
OVERRIDEABLE Y or N
Select Y if you wish to enter a percentage or amount to
override the preset percentage or amount set in the RATE
field.
To Next Page
Loading...
