Sam4s SPS-300 Series - Management Functions; Introduction; Manager Mode

SAM4s SPS-300 Operator's & Programming Manual v1.34 Operations • 93
4. Press a PLU on the keyboard, or enter a PLU number and press the PLU key.
The cursor will advance to the price field.
Note: The not found PLU will assume the same attributes of the PLU selected
here. For example, if the item scanned is a “liquor” item, then press another
PLU in the liquor category, or if you are using a PLU designated to accept open
liquor entries, that PLU must be set to be a preset PLU with a preset value of
zero and preset override allowed. (If you copy the PLU to an open PLU, the not
found PLU will also be an open PLU.).
5. Enter the PLU price and press CASH. The PLU will register using the descriptor
and tax status of the copied PLU.
Detail Entry Method
1. Scan an item or input a PLU number. If the item is in the PLU file, it will
register, if an item is not in the PLU file, an error will sound continually.
2. Press CLEAR, the NOT FOUND PLU screen will display:
NOT FOUND PLU PROGRAM ?
0 : NO 1 : YES
3. Press the numeric “1” key to allow the registration of the PLU. The cursor will
point at the SELECT COPY PLU field.
NOT FOUND PLU PROGRAM ?
SELECT COPY PLU
0
PRICE: 0