Sam4s SPS-300 Series - Page 178

178 • Program Mode Programming SAM4s SPS-300 Operator's & Programming Manual v1.34
Option Entry Description
RESET GRAND TOTAL
AFTER Z REPORT
Y or N
Select Y if you wish to reset the grand total to zero
after the financial report is reset.
OPEN DRAWER WHEN
REPORTS ARE RUN
Y or N
Select N to stop the drawer from opening when reports
are run.
OPEN DRAWER
DURING TRAIN MODE
Y or N
Select N if you do not want the cash drawer to open
during training mode operations.
DECIMAL PLACE 0-3
Enter a digit to place the decimal point the selected
number of positions from the right.
DATE FORMAT IS
0:MDY 1:DMY 2:YMD
0, 1, or 2
Select 0 for MMDDYY, select 1 for DDMMYY, or
select 2 for YYMMDD date printing format.
MODIFIER:
0:POP UP AFTER ITEM
1:POP UP AFTER SALE
2:STAYDOWN
0, 1, or 2
A MODIFIER key alters the next PLU registered,
either by changing the code number of the PLU so that
a different item is registered, or by adding the modifier
descriptor and not changing the code of the subsequent
PLU. If you press a modifier key, you have the option
of the modifier applying only to the next item (0),
having the same modifier apply to any subsequent item
registered in the same transaction (1), or having the
same modifier apply to any subsequent item on any
subsequent transaction (2).
% AND TAX CAL. 0, 1, or 2
Select the digit that represents the appropriate rounding
method for tax and discount calculations: 0 for round
up at 0.5 of a penny (0.005), 1 for always round up or 2
for always round down.
SPLIT PRICE CAL. 0, 1, or 2
Select the digit that represents the appropriate rounding
method for split pricing (i.e. 2 at 3 for $1.00)
calculations: 0 for round up at 0.5 of a penny (0.005), 1
for always round up or 2 for always round down.
COMPULSORY EAT-IN
T-OUT D-THRU
BEFORE
TENDERING
Y or N
Choose Y if you wish to enforce use of one of the
destination keys (EAT-IN, TAKE OUT, or DRIVE
THRU) before the sale is finalized.
HASH IS
Y:NORMAL N:NON-
ADD
Y or N
Y: Hash adds to all totals except the gross and net
sales totals on the financial report.
N: Hash does not add to any totals, except the HASH
total on the financial report.
ALLOW PRINT SCREEN
ON X/TIME KEY
Y or N
Choose N if you wish to disable the print screen
function of the X/TIME key.