Sam4s SPS-320 - Page 124

120 • Service Mode Programming Sam4s SPS-300 OP Manual v1.35
Service Mode Menu
Turn the key to the S position (one position clockwise from the PGM position) to
display the SERVICE MODE menu:
SERVICE MODE 
0. HW TEST
1. CLEAR ALL TOTALS
2. CLEAR GRAND TOTAL
3. CLEAR PLU FILE
4. FLASHROM INFORMATION
5. MEMORY ALLOCATION
6. KEY ASSIGNMENT
Press PAGE DOWN to view the remainder of the SERVICE MODE menu:
SERVICE MODE 
7. IRC OPTIONS
8. RS232C PORT
9. SD CARD OPERATION
00.CLEAR CURR.BATCH