Sam4s SPS-320 - Clerk

Sam4s SPS-300 OP Manual v1.35 Program Mode Programming • 249
Download Programs
When multiple registers are connected in an IRC network, you can download programs from one
register to any or all of the remaining registers.
From the PGM control lock position menu, press 9 for DOWNLOAD
PROGRAMS. The PROGRAM DOWN screen displays:
PROGRAM DOWN
0. IRC ALL
1. IRC SELECT
From the PROGRAM DOWN screen, press 0 if you want to download programs to
all of the registers, then go to step 4. If you wish to download only to selected
registers, press 1:
PROGRAM DOWN
0.IRC ALL
1.IRC SELECT
# 1Y  2N 3N 4N 5N 6N 7N 8N
If you pressed 1 to download to selected registers, the PROGRAM DOWN screen
now displays Y or N for each of the eight possible registers in an IRC system. For
example, if your IRC system consists of 3 registers, the default Y will display for
register 1, 2, and 3. The cursor arrow points at the first register. Press the YES/NO
key to toggle the selection for register #1 to Y or N. Press CASH. The cursor arrow
moves to #2. Select Y or N for second register. In this manner you can determine
which registers you wish to download programs to. When you have selected Y or N
for the last register, the PROGRAM DOWN screen appears.