124 • Service Mode Programming Sam4s SPS-300 OP Manual v1.35
Flash ROM Information
This selection displays the version, check sum and date of the Flash ROM. You may be asked to
check your Flash ROM version if you contact your dealer for assistance. You should also verify
that all registers in an IRC configuration have the same version Flash ROM.
From SERVICE MODE menu press 4 to view the FLASHROM INFORMATION.
The message "PLEASE WAIT . . . ." displays momentarily until the SPS-300
FLASHROM INFORMATION displays:
FLASHROM INFORMATION.
VERSION : USA 01.027
CHECKSUM : A6D8
BOOT/APP : 0806/9ED2
PLU’S USED: 300/2000
EFT VER. : DTRAN 01.000
MAY.10 2012
PRESS CLEAR KEY
Press CLEAR to return to the SERVICE MODE menu.
Memory Allocation
Note: You must step through every memory allocation field to implement new memory
allocation. If you press CLEAR, at any field you will abort memory allocation processes
without making changes. Changes to Memory Allocation will clear all program data.
At the SM control lock position menu, press 5 for Memory Allocation programming.
The MEMORY ALLOCATION screen displays:
MEMORY ALLOCATION.
TTL AVAIL : 1855488
TTL USED : 314865
# PLU’S 2000
# LEVELS (1-5) 1
# CLERKS 10
# GROUP TOTALS 20
The total available memory is displayed on the first line of the screen (TTL AVAIL).
The total memory currently allocated is displayed on the second line of the screen
(TTL USED). The TTL USED field is updated when you complete a change and
press CASH.
To Next Page
Loading...
