Sam4s SPS-320 - Clear Current Batch

132 • Service Mode Programming Sam4s SPS-300 OP Manual v1.35
Press PAGE DOWN to view page 7 of the PORT PROGRAM:
PORT 1 PROGRAM PG7
PRINTER TYPE 0
14:STAR SP-200
15:STAR SP-298
16:STAR SP-300
17:STAR TSP-200
Press PAGE DOWN to view page 8 of the PORT PROGRAM:
PORT 1 PROGRAM PG8
POLE DISLAY TYPE 0
0:EPSON 1:ICD
RESERVED
Refer to "RS232C Settings Screen Program Notes" on the next page to fill the fields
for each port.
Press the CLEAR key to finalize and return to the SERVICE MODE screen.