Sam4s SPS-320 - Check Cashing

186 • Program Mode Programming Sam4s SPS-300 OP Manual v1.35
Option Entry Description
PRINT E.J FROM
Y:OLDEST N:NEWEST
Y or N Y: Prints electronic journal from lowest consecutive
number to highest.
N: Prints electronic journal from highest consecutive
number to lowest.
NOT PRINT WHEN
POLLING REPORTS
Y or N Choose Y if you would like to suppress register
printing when reports are polled.
PRINT PLU #
ON PLU REPORT
Y or N Determines whether PLU# is displayed on the report.
GRAND TOTAL IS
Y:NET N:GROSS
Y or N Choose Y if you wish the grand total to accumulate
daily net sales totals. Choose N if you wish the grand
total to accumulate daily gross sales totals.
SEND ORDER TO KP
AT SUBTOTA L
Y or N Choose Y to print orders on the KP when the
SUBTOTAL key is pressed. Choose N to print orders
on the KP when the order is finalized.
PRINT DATE ON
SERV ON HARD CHECK
Y or N If Y, the posting date will print at every posting on the
hard check.
COPY OF DATATRAN
RECEIPT (0-99)
0-99
Enter the number of copies of the DataTran (integrated
credit) EFT receipts.
PRT WHOLE CARD NO. Y or N If N, only the last four digits of the credit/debit card
will print.
PRT EXP. DATE Y or N If N, the credit card expiration date will not print on the
DataTran (integrated credit) EFT receipt.
PRINT LAST LINE OF EJ 00 Quick journal review (R-Mode/10 Subtotal) prints last
xx lines of electronic journal. (Where xx is 0-99.)
ORDER OF PLU
PRINTED ON KP BY
GROUP
Y or N
By default (N) KP items will print in the order they are
entered. If Y, KP items are sorted by group with a
separate chit printed for each group. (v 1.046 or later)
PRINT GROUP DESC ON
KP
Y or N
If option above set to Y, choose Y here to print the
group descriptor at the top of each KP chit. (v 1.046 or
later)
PRINT DATE LAST Z
REPORT ON Z REPORT
Y or N
If Y, the Z report will print the date of the last Z report.
(requires v1.083 or later)
DISABLE LINE FIND ON
THE SLIP PRINTER
Y or N
If Hard Check system and optional slip printer are
used, and this option = Yes, the automatic line find will
be disabled. Printing on the slip will begin where the
slip is inserted. (requires v01.130 or later)