Sam4s SPS-320 - Totaling a Charge Sale

Sam4s SPS-300 OP Manual v1.35 Operations • 61
Cancel
The CANCEL key allows you to stop any transaction. Anything registered within the
transaction before the CANCEL key is pressed is automatically corrected. The CANCEL key
can be inactivated through programming, see "Function Key Programming" in the "Program
Mode Programming" chapter, or the key can be programmed to require manager control.
Note: When a function is located on a function look up menu key, you access the function
by pressing the appropriate function look up key, then pressing the numeric digit
corresponding to the function you wish to select. On the default keyboard, the CANCEL
function is function #1 on the function look up 1 menu, so to use the CANCEL function you
would first press FUNCTION LOOK#1, then press the numeric 1 key.
1. Register the items you wish to sell.
2. Press the CANCEL key (or access the
CANCEL function from the function
look up menu.)
CANCEL
THANK-YOU
CALL AGAIN
DATE 06/05/2011 SUN TIME 08:33
PLU1 T1 $2.29
PLU2 -0.50
CANCEL *************************
CLERK 1 No.000011 00001
Void Position Operations
You can use the VOID control lock position to correct any complete transaction. To correct any
transaction:
1. Turn the control lock to the VOID
position.
2. Enter the transaction you wish to correct
exactly as it was entered originally in the
REG control lock position. You can
enter discounts, voids, returns, tax
exemptions or any other function.
3. All totals and counters are corrected as if
the original transaction did not take
place.
THANK-YOU
CALL AGAIN
DATE 06/05/2011 SUN TIME 08:33
VOID MODE **********************
PLU1 T1 -2.29
PLU2 -1.00
TAX1 AMT -0.14
TOTAL -3.43
CASH -3.43
CLERK 1 No.000011 00001