68 • Operations Sam4s SPS-300 OP Manual v1.35
Tendering a Charge Sale
Tendering a charge sale may or may not be allowed. See "Function Key Programming" in the
"Program Mode Programming" chapter to set tendering options for the charge keys, i.e. whether
to allow over tendering or to enforce tendering.
1. Register the items you wish to sell.
2. Enter the amount of the charge and press
one of the charge keys if it is located on
the keyboard:
0 002
CHARGE
1
- Or -, if the charge function is located on
a function look up key, enter the amount
of the charge:
0 002
3. Press FUNCTION LOOK2, then press
the digit representing the charge function
you are using:
FUNC
LOOK#2
1
THANK-YOU
CALL AGAIN
DATE 06/05/2011 SUN TIME 08:33
PLU1 T1 $2.99
PLU1 T1 $2.99
4X $1.99
PLU2 $7.96
TAX1 $0.36
TOTAL $14.30
CHARGE1 $20.00
CHANGE $5.70
CLERK 1 No.000011 00001
To Next Page
Loading...
