Sam4s SPS-300 OP Manual v1.35 Program Mode Programming • 157
Enter the number of the last PLU in the range you wish to delete and press PLU. The
CONFIRM DELETE screen displays:
CONFIRM DELETE
ARE YOU SURE YOU
WISH TO DELETE PLU#
1234 TO
1240
CASH=DELETE
CLEAR=ABORT
Press CASH to delete the PLU; press CLEAR to return to the PLU DELETE screen
without deleting the PLU.
Note: Before a PLU can be deleted, all PLU Report information must be cleared (Daily
and Period. If the PLU is an inventory item, you must change the stock to zero. The Not-
Found PLU totals must also be reset.
To Next Page
Loading...
