Sam4s SPS-320 - Declaration

Sam4s SPS-300 OP Manual v1.35 Operations • 93
Press a PLU on the keyboard, or enter a PLU number and press the PLU key. The
cursor will advance to the price field.
Note: The not found PLU will assume the same attributes of the PLU selected here. For
example, if the item scanned is a “liquor” item, then press another PLU in the liquor category, or
if you are using a PLU designated to accept open liquor entries, that PLU must be set to be a
preset PLU with a preset value of zero and preset override allowed. (If you copy the PLU to an
open PLU, the not found PLU will also be an open PLU.).
Enter the PLU price and press CASH. The PLU will register using the descriptor
and tax status of the copied PLU.
Detail Entry Method
Scan an item or input a PLU number. If the item is in the PLU file, it will register, if
an item is not in the PLU file, an error will sound continually.
Press CLEAR, the NOT FOUND PLU screen will display:
NOT FOUND PLU PROGRAM ?
0 : NO 1 : YES
Press the numeric “1” key to allow the registration of the PLU. The cursor will point
at the SELECT COPY PLU field.
NOT FOUND PLU PROGRAM ?
SELECT COPY PLU
0
PRICE: 0