248 • Program Mode Programming Sam4s SPS-300 OP Manual v1.35
NLU Code Number
NLUs are fixed keys on the keyboard (like traditional department keys) that access specific
PLU’s.
On the default keyboard the PLU# assigned to the NLU key is the same, i.e. NLU key number
one is PLU #1. However, with this program, you can assign any PLU number you wish to any
one of the NLU keys.
From the PGM control lock position menu, press 8 for NLU CODE# PGM. The
NLU CODE PROGRAM screen displays:
NLU CODE PROGRAM
PRESS THE NLU KEY ON THE KEYBOARD
YOU WISH TO PROGRAM
PRESS CLEAR TO EXIT
Press the NLU key on the keyboard you wish to program, or press CLEAR to exit.
NLU CODE PROGRAM
CURRENT PLU CODE#
1
ENTER
NEW PLU CODE#
0
The current PLU code number displays. Type the new PLU code number you wish to
use for this NLU key, press CASH.
The NLU CODE PROGRAM screen returns. Continue from step 2 to program
additional NLU keys, or press CLEAR to exit.
To Next Page
Loading...
