Sam4s SPS-320 - Food Stamp Sales

Sam4s SPS-300 OP Manual v1.35 Operations • 65
Eat In/Take Out/Drive Thru Sales
Different types of sales, such as "Eat In", "Take Out" and "Drive Thru" can be categorized by
placing separate keys on the keyboard. EAT IN, TAKE OUT, and DRIVE THRU keys
function as subtotal keys. You can force the operator to press one of the keys before tendering.
See "System Option Programming" in the "Program Mode Programming" chapter. Separate
totals will be maintained on the financial report to detail sales counts and amounts for each key.
Note: EAT IN, TAKE OUT, and DRIVE THRU can be programmed to exempt taxes to
accommodate area where food is taxed differently.
Totaling and Tendering
There are ten tender functions available to categorize sales. CASH and CHECK are individual
keys on the keyboard. The eight charge functions CHARGE 1 - CHARGE 8 are available on
the FUNCTION LOOK#2 key on the default keyboard.
Depending upon how your register is programmed you might find charge keys as individual
function keys on the keyboard, or listed on one of the function look up keys.
Totaling a Cash Sale
1. Register the items you wish to sell.
2. To total a cash sale, press CASH:
CASH
3. The display will indicate the total amount
of the cash sale.
THANK-YOU
CALL AGAIN
DATE 06/05/2011 SUN TIME 08:33
PLU2 $7.96
TOTAL $7.96
CASH $7.96
CLERK 1 No.000011 00001
Totaling a Check Sale
1. Register the items you wish to sell.
2. To total a cash sale, press CHECK:
CHECK
3. The display will indicate the total amount
of the cash sale.
THANK-YOU
CALL AGAIN
DATE 06/05/2011 SUN TIME 08:33
PLU2 $7.96
TOTAL $7.96
CHECK $7.96
CLERK 1 No.000011 00001