208 • Program Mode Programming Sam4s SPS-300 OP Manual v1.35
DATATRAN TIP
Firmware versions supporting EMV provide a new DATATRAN TIP function key (key code
418) for TIP entry in register mode when using integrated payment. If your application is set for
“Fine Dining” you must place this function on the keyboard. The key is programmable for
manager control.
DTAN TIP PROGRAMMING
DESC : DTRAN TIP
UNDER MGR CONTROL N
SEND TO EFT Y
Datatran Tip Program Notes
DESC Alphanumeric
12 character
You can program a unique descriptor for each foreign
currency. The default descriptor is DTRAN TIP.
UNDER MGR
CONTROL
Y or N Select Y if you do not want the operator to use this function
in REGISTER mode. When selected, the function is
allowed only in the X control lock position.
SEND TO EFT Y or N Select Y if the DataTran is connected.
Required
Setting
To Next Page
Loading...
