250 • Program Mode Programming Sam4s SPS-300 OP Manual v1.35
PROGRAM DOWN
0.PLU
1.GROUP
2.SALES TAX
3.SYSTEM OPTION
4.PRINT OPTION
5.FUNCTION KEYS
6.CLERK
From the PROGRAM DOWN screen, find the digit that represents the program you
wish to download. Press PAGE DOWN to view the second page of the PROGRAM
DOWN options. Note that 00 downloads all programs.
PROGRAM DOWN
7.LOGO DESC.
8.NLU CODE# PGM.
9.TIME & DATE/MISC
00.ALL
Press the digit that represents your selection. This display will indicate the number of
the machine that the program is downloading to. The printer at the receiving register
will indicate "PROGRAM DOWN" and "PASS" or "FAIL" to indicate if the
download is successful.
Note: If there is a failure in IRC communication, the register that programs are being sent
from will display "IRC NOT READY" and the register number indicating no
communication is possible.
Note: If one of the registers in the IRC is still on the program down page from a previous
IRC download and another download is attempted from another register, the error “Not
ready 0” will display. Be sure to press [CLEAR] to exit to the main program mode screen
at all ECR’s in the system before initiating a new program download operation.
To Next Page
Loading...
