Sam4s SPS-300 OP Manual v1.35 Operations • 51
Price Level Key
If you choose to use the price level feature, you must allocate memory for each level. See
"Memory Allocation" in the "Service Mode Programming" chapter. Note that the default
program selects one price level. You must also place price level keys on the keyboard. See
"Function Key Assignment" in the "Program Mode Programming" chapter.
If you use this feature, the same PLU can be given up to 5 different preset prices. Price Level
keys shift the price that is being registered. Levels can be:
• stay down so that registrations will stay in the selected level until another level is
selected,
• pop-up after each item to register, for example large, medium or small soft drink,
• pop-up after each transaction to register the same level until the transaction is finalized.
See "System Options" in the "Program Mode Programming" chapter to set how the price level
keys operate.
Pop-Up Price Level Keys
1. Press a preset PLU key. For example,
press PLU 1 programmed with a price of
$1.00 for price level 1.
1
2. Press the LEVEL 2 key. The message
"LEVEL 2" displays.
LEVEL
2
3. Press the same PLU key. In this example
the PLU 1 key is programmed with a
price of $2.00 for price level 2.
1
4. Press another PLU key. In this example
press PLU 2 programmed to register
PLU #2 with price level 1. Note that the
level 1 price is registered.
THANK-YOU
CALL AGAIN
DATE 06/05/2011 SUN TIME 08:33
PLU1 $1.00
PLU1 $2.00
PLU2 $1.50
TOTAL $4.50
CASH $4.50
CLERK 1 No.000011 00001