Sam4s SPS-320 - Download Programs

228 • Program Mode Programming Sam4s SPS-300 OP Manual v1.35
SERVICE
Press the SERVICE key to view the service function key options:
SERVICE KEY PROGRAMMING 
DESC : SERVICE 
NON-ADD # COMP N
PRINT ON RECEIPT Y
NEGATIVE BALANCE
IN MGR CONTROL N
CALCULATE TAX1 Y
CALCULATE TAX2 Y
Press CASH from the last field or press PAGE DOWN to view the second page of
service function key options:
SERVICE KEY PROGRAMMING 
CALCULATE TAX3 Y
CALCULATE TAX4 Y
COMPULSORY VALID N
HARD CHECK PRINTER
PORT(0-4) 0
Press CASH from the last field to return to the FUNCTION KEY PROGRAM
screen, or press CLEAR at any time to return to the FUNCTION KEY PROGRAM
screen without saving changes.
SERVICE Key Program Notes
Option Entry Description
DESC
Alpha-numeric
12 character
You can program a unique descriptor. The default descriptor
is SERVICE.
NON-ADD #
COMP
Y or N
Select Y if you wish to force the entry of a non-add number
(i.e. a tax exempt #) before the key is used
PRINT ON
RECEIPT
Y or N Select N to not print on the receipt.
NEGATIVE
BALANCE IN
MGR CONTROL
Y or N Select Y if you do not want the operator to use this function
in REGISTER mode. When selected, the function is allowed
only in the X control lock position.
CALCULATE TAX1-4
Y or N Select Y to calculate and add the appropriate tax
automatically when finalized with this key.
COMPULSORY
VALIDATION
Y or N Choose Y to enforce validation if an optional printer with
validation capability is connected to an RS-232C port.
HARD CHECK
PRINTER PORT
(0-4)
0-2 If you are using a hard check system, enter the RS232C port
number (1 or 2) where the optional guest check printer is
attached.