Sam4s SPS-300 OP Manual v1.35 Program Mode Programming • 213
FUNCTION LOOK UP (1-2)
Two function keys (FUNCTION LOOK 1and FUNCTION LOOK 2) are available to access
up to eight functions each. You can use function look up keys to locate functions that are
necessary for your application, but may not fit on the keyboard layout, or to locate functions that
are used only occasionally.
With this program, you can determine which functions are located on each function look up key,
and you can also access these functions for option programming.
Press the FUNCTION LOOK UP 1 or FUNCTION LOOK UP 2 key to view the
appropriate function program menu screen:
FUNC #1 PROGRAM
0. MENU ASSIGNMENT
1. STATUS PROGRAM
Press 0 to select the menu assignment on the function look-up key or press 1 to
program the options for a function on the function look-up key. If you are
programming function key options, refer to each function separately in this chapter to
set function options. If you chose 0 to program menu assignment, the FUNC. #
MENU ASSIGN screen displays:
FUNC #1 MENU ASSIGN.
PUSH MENU NUMBER TO
BE PROGRAMMED (1-8)
0
To Next Page
Loading...
