Sam4s SPS-300 OP Manual v1.35 Program Mode Programming • 255
Time & Date
Use this program to set the clock and calendar on your SPS-300. The date changes
automatically. After initial setting, time changing will probably be required only for beginning
and ending daylight savings time.
From the PGM control lock position menu, press 00 for MORE. The PROGRAM
MODE page 2 screen displays.
From the PROGRAM MODE page 2 screen, press 4 for TIME & DATE. The
SET DATE & TIME screen displays:
SET DATE & TIME
SET TIME : HH:MM
(MILITARY) 09:01
SET DATE : MM.DD.YY
09.21.11
Type the current time in 24-hour format (i.e. military time, where 13:00 is 1:00 PM.)
Press CASH.
Type the current date in MM (month) DD (day) and YY (year) format. Press CASH.
To Next Page
Loading...
