Sam4s SPS-320 - Page 131

Sam4s SPS-300 OP Manual v1.35 Service Mode Programming • 127
KEY ASSIGNMENT
PUSH KEY TO BE
PROGRAMMED
PRESS CASH TO EXIT
0
Continue to program function key locations as necessary. When you have completed
function key programming, press the CASH key to finalize. The screen displays:
KEY ASSIGNMENT
PRESS ENTER TO SAVE CHANGES
OR
PRESS CLEAR TO EXIT
WITHOUT SAVING
Press CASH to save the changes you have made, or press CLEAR to exit without
saving changes.
The printer will print out a receipt showing all the changes made to the keyboard.
Notes:
Numeric keys (0-9), CLEAR, and CASH cannot be removed from the keyboard unless they
have been assigned to a new keyboard location. This protects the programmer from accidentally
removing keys that are required for register programming and operations.
If you wish to program the CASH key, select it immediately after selecting KEY
ASSIGNMENT from the SERVICE MODE menu. After the initial key is programmed, the
CASH key is used to finalize the program.