Sam4s SPS-320 - Page 31

Sam4s SPS-300 OP Manual v1.35 Getting Started • 27
Getting Started
Quick Start Steps
SAM4s ECRs are designed to work out-of-the-box. You can sign on a clerk, enter amounts and
finalize a sale. Most functions are active and ready to use.
Use the Quick Start Instructions provided here to prepare your SPS-300 series ECR for entering
a program. Because the SPS-300 features on-screen programming, the dealer or user can simply
follow the menus presented when the key is turned to the PGM (program) position. Detailed
programming steps and reference information is found in the Program section of this manual.
Steps In this chapter:
1. Unpacking
2. Installing the Paper
3. Clearing All Memory
Unpacking
1. Unpack and unwrap the cash register.
2. Locate in the packing the following items:
• Paper roll(s)
• 1 rewind spindle (SPS-340 and SPS-345)
• 2 sets of control keys
3. Remove the cardboard protectors from the cash drawer.
4. Plug the register into a grounded outlet (three-prong), turn the power switch on (note the
power switch cover), insert a control key and turn the key to the REG control lock
position.