3 - 40 HS70A Service Manual
NOTE
You cannot change DICOM Settings or DICOM Destination
Settings when a patient ID has been registered. To change the
date and time, you should finish the current diagnosis by
tapping the End Exam button on the touch screen.
▐ DICOM Transfer Mode
Select a transfer method:
DICOM Transfer Mode
- Send On End Exam: Send all saved images when you press the End Exam button.
- Send As You Go: Send an image whenever you press the Save button to save it.
▐ Store SR at End of Exam
Select whether to store SR at the end of the exam. When you check this checkbox, SR is
automatically stored at the end of the exam. Otherwise, it is not stored.
▐ Adding DICOM Services
Click Add on the screen. A screen is displayed where you can enter a DICOM service to
add. After adding a service, click Save to save the information. Click Cancel to cancel.
Services
Select the type of service to use via DICOM. The supported DICOM servers are Storage,
Print, Worklist, PPS, SC, Storage SR, and DICOM QR.
Alias
Enter the name of the DICOM server.
AE Title
Enter the AE title of the DICOM server. Consult your network administrator before
specifying this option.
Connect Timeout
The connection will time out if there is no response within the configured time period.
To Next Page