Sanyo PLC-XM100L - Initial Projector Setup; Performing Initial Settings

22
Chapter 3 Basic Setting and Operation
Initial setting
After installing the projector, perform the following basic initial setting.
Click Initial Setting on the main menu to display the initial setting page.
Item Description
Language..............Switches display language on the setting page. English or Japanese.
Model name .......Indicates the model name of the projector
SERIAL NO. ..........
Indicates the serial number of the projector
Network PIN code ......
Sets the Network PIN code to login the setting page (p.23)
PJLink.......................Switches PJLink password authentication on or off (p.23)
Password...............Password for PJLink function (p.23)
* The serial number in the figure is used for an example.