EasyManuals Logo

Sanyo PLC-XM100L User Manual

Sanyo PLC-XM100L
149 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #59 background imageLoading...
Page #59 background image
59
Setting
Key lock
Key lock
PIN code lock
This function locks the side control and remote control buttons
to prevent operation by unauthorized persons.
......Unlocked.
......Lock the operation of the side control.
To unlock, use the remote control.
......Lock the operation of the remote
control. To unlock, use the side control.
If the side control accidentally becomes locked and you do
not have the remote control nearby or there is something
wrong with your remote control, contact the dealer where you
purchased the projector or the service center.
This function allows you to use the Key lock and PIN code lock
function to set the security for the projector operation.
This function prevents the projector from being operated
by unauthorized persons and provides the following setting
options for security.
Off .....Unlocked.
On1 .....Enter the PIN code every time turning on
the projector.
On2 .....Enter the PIN code to operate the projector
once the power cord is disconnected; as long as
the AC power cord is connected, the projector
can be operated without a PIN code.
Whenever you change the PIN code lock setting or the PIN
code (the four-digit number), you are required to enter the PIN
code. The "1234" is set as the initial PIN code at the factory.
If you want to change the PIN code lock setting, Press the
SELECT button and the PIN code dialog box appears.
Off
PIN code lock
Off
Security (Key lock and PIN code lock)

Table of Contents

Other manuals for Sanyo PLC-XM100L

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sanyo PLC-XM100L and is the answer not in the manual?

Sanyo PLC-XM100L Specifications

General IconGeneral
Vertical scan range48 - 100 Hz
Horizontal scan range15 - 100 kHz
Projection technologyLCD
Contrast ratio (typical)1000:1
Projector native resolutionXGA (1024x768)
Lamp typeNSH
Lamp power330 W
Light source typeLamp
Service life of light source2000 h
Service life of light source (economic mode)3000 h
Analog signal format systemNTSC, PAL, SECAM
S-Video inputs quantity1
Dimensions (WxDxH)489.5 x 371.1 x 164 mm
Noise level38 dB
Power consumption (standby)0.6 W
Power consumption (typical)400 W
Power consumption (economy mode)338 W
Weight and Dimensions IconWeight and Dimensions
Weight8900 g

Related product manuals