60
Setting
Use the Point Ÿź buttons to select Off, On1 or On2. Press the
SELECT button to close the dialog box.
Change the PIN code lock setting
Enter a PIN code
8VHWKH3RLQWŸźEXWWRQVWRHQWHUDQXPEHU3UHVVWKH3RLQWŹ
button to fix the number and move the red frame pointer to the
next box. The number changes to ½. If you fixed an incorrect
QXPEHUXVHWKH3RLQWŻEXWWRQWRPRYHWKHSRLQWHUWRWKH
number you want to correct, and then enter the correct number.
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to Set.
Press the SELECT button so that you can start to operate the
projector.
If you entered an incorrect PIN code, PIN code and the number
(½½½½) will turn red for a moment. Enter the correct PIN code
all over again.
Enter a PIN code
The PIN code can be changed to your desired four-digit number.
Press the Point ź button to select PIN code change and press
the SELECT button. The New PIN code input dialog box appears.
Set a new PIN code.
Change the PIN code
CAUTION:
WHEN YOU HAVE CHANGED THE PIN CODE, WRITE DOWN
THE NEW PIN CODE IN COLUMN OF THE PIN CODE NO.
MEMO ON PAGE 84, AND KEEP IT SECURELY. IF YOU
FORGET YOUR PIN CODE, THE PROJECTOR CAN NO
LONGER BE STARTED.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
