29
Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to
make the desired operation quickly without calling up the On-Screen Menu.
Press the ZOOM buttons on the remote control to zoom in and out
the image.
ZOOM buttons
Press the FOCUS buttons on the remote control to adjust focus of
the image.
FOCUS buttons
See page 27 for details.
LENS SHIFT button
Remote Control
D.ZOOM
button
SHUTTER
button
AUTO PC
button
ZOOM
buttons
FOCUS
buttons
LENS SHIFT
button
3Note:
See the next page for the description of other
buttons.
INFO. button
Basic Operation
SHUTTER button
See page 27 for details.
SCREEN
button
INFO. button
Press the AUTO PC button on the remote control to operate the
Auto PC adj. function. The computer screen adjustment can be
done easily by pressing this button. See page 37 for details.
AUTO PC button
Press the SCREEN button on the remote control to select the desired
screen size. The selected screen size symbol appears on the screen
for 4 seconds. See pages 42 to 44 and 49 to 50 for details.
Press and hold the SCREEN button for more than 5 seconds to
return all the screen size adjustment setting to the factory default
setting.
SCREEN button
Press the D.ZOOM button on the remote control to enter to the
Digital zoom +/– mode. See page 43 for details.
D.ZOOM button
POINT ŸźŻŹ
buttons
Information display can be used to confirm the current operating
condition of the projector and the signal being projected through
the projector.
Press the INFO. button on the remote control to display the
information window on the screen. To hide the information
window, press the INFO. button again.
The information window can also be selected from the
menu.
Operating with Remote Control
Information Menu
3Note:
• The H-sync freq. and V-sync freq. values described in the
figure may be different from the actual values.
•
SERIAL NO. is used to service the projector.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
