Sanyo PLC-XM100L User Manual

73
Input
RGB (PC analog)
Y, Pb/Cb,Pr/Cr
RGB (Scart)
RGB (PC digital)
RGB (AV HDCP)
Network
Video
RGB
Video
Y, Pb/Cb,Pr/Cr
S-video
Input 3
Input
H-sync freq.
V-sync freq.
Information
Screen
Language
Lamp status
Power management
Remote control
3Note:
The Menu display varies depending on the input signal.
Appendix
Volume
Mute On/Off
Sound
0–63
Built-in SP
PIN code lock
Key lock
SERIAL NO.
Network will be displayed only when an optional PJ-Net Organizer
is attached.
*
*
Input 1
Input 2
Lamp counter
Filter counter
Simple mode
On/Off
System
(1)
Mode 1
Mode 2
¼ System displayed in the System Menu varies depending on the input signal.
SVGA 1
SVGA 2
SVGA 3
Image adjust
Contrast
Brightness
Color temp.
Red
Gamma
Store
0–63
0–63
0–63
0–15
Image 1
Image 10
Reset Yes/No
Sharpness
0–31
Green
Blue
0–63
0–63
Mid
Low
XLow
Adj
High
Offset
Red/Green/Blue
Image select
Standard
Real
Image 1
Image 10
PC adjust
Auto PC adj.
Fine sync.
Total dots
Position H
Position V
Current mode
Clamp
Display area - H
Display area - V
Reset
Mode free
Store
0–31
Yes/No
Mode 1
Mode 10
Quit
Menu Tree
Computer Input/Video Input
Computer Input
Image adjust
Image select
PC adjust
Sound
Information
Input

Sanyo PLC-XM100L Specifications

General

Vertical scan range	48 - 100 Hz
Horizontal scan range	15 - 100 kHz
Projection technology	LCD
Contrast ratio (typical)	1000:1
Projector native resolution	XGA (1024x768)
Lamp type	NSH
Lamp power	330 W
Light source type	Lamp
Service life of light source	2000 h
Service life of light source (economic mode)	3000 h
Analog signal format system	NTSC, PAL, SECAM
S-Video inputs quantity	1
Dimensions (WxDxH)	489.5 x 371.1 x 164 mm
Noise level	38 dB
Power consumption (standby)	0.6 W
Power consumption (typical)	400 W
Power consumption (economy mode)	338 W

Weight and Dimensions

Weight	8900 g