52
This function decides whether to display On-Screen Displays.
On ............................... Show all the On-Screen displays. Use this
function when you want to project images
after the lamp becomes bright enough. The
factory default setting is in this option.
Countdown Off .......... Show the input image instead of the
countdown when turning on the projector.
Use this function when you want to project
the image as early as possible even when
the lamp is not bright enough.
Off ............................... Hide the On-Screen Displays except;
Ɣ On-Screen Menu
Ɣ Power off? (p.24)
Ɣ No signal for Power management.
(p.57)
Ɣ Please wait ...
Ɣ Arrows for the True function in the
Screen Menu (p.42)
Ɣ P-timer
Setting
Select the background screen for when no input signal is detected.
Press the Point Ÿź buttons to switch between each option.
Blue .... Project a blue background.
Black . . . Project a black background.
It is invalid when there is no image.
User .... Project an image captured in the Logo setting.
Logo select
This function allows you to customize the screen logo with Logo
select, capture, Logo PIN code lock and Logo PIN code
change functions.
3Note:
When
On is selected in the Logo PIN code lock function, Logo select,
Capture and Logo PIN code change cannot be selected.
Logo select
This function decides on the starting-up display from among
following options.
User .......... Show the image you captured.
Default ...... Show the factory-set logo.
Off ............. Show the countdown display only.
Off
Display
Background
Logo (Logo and Logo PIN code lock settings)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
