SATO S84NX - Internal View

1 Introduction
S84NX/S86NX Service Manual
8
Back to top
1.3.3 Internal View
(1)
(3)
(4)
(2)
(6)
(12)
(7)
(13) (14)
(10)
(8)
(5)
(11)
(9)
(1)
Ribbon supply spindle
(2)
Ribbon rewind spindle
(3)
Ribbon roller
(4)
Media guide
(5)
Media sensor adjustment knob * Used to adjust the position of the media sensor.
(6)
Feed lock latch * Used to open the feed roller and media sensor assembly.
(7)
Feed roller and media sensor assembly
(8)
Plate lock lever * Used to release the Pressure plate.
(9)
Pressure plate * Consumables
(10)
Head lock lever * Used to release the print head assembly.
(11)
Print head * Consumables
Creates an image directly on the media or by using a ribbon. Clean the print head regularly.
(12)
Feed roller * Consumables
(13)
Pressure roller * Consumables
(14)
Platen roller * Consumables