SATO S84NX - Maintenance

Back to top 2 Operation and Confi guration
S84NX/S86NX Service Manual
31
2.3.6 Maintenance
Select [Tools]
>
[Service]
>
[Maintenance].
Printer Serial
Set manually the printer’s Serial number whenever the CONT PCB is
replaced.
USB Serial
Enable or disable the function to change the USB serial number.
(Default: Disabled)
Disabled: Cannot change the USB serial number.
Enabled: Can change the USB serial number.
To change the USB serial number, check the “Change USB Serial” in
Offl ine
>
[Settings]
>
[Interface]
>
[USB].