SATO S84NX - Test Print

Back to top 2 Operation and Confi guration
S84NX/S86NX Service Manual
14
2.2.1 Test Print
Before starting work, print out the factory settings and check the following.
• Check the print position, sensor level, etc.
• Check the password for the [Service] menu
1
Place the label on the printer.
2
Select [Settings]
>
[Tools]
>
[Test Print]
>
[Factory]
>
[ ] (right select button).
3
After printing multiple labels, select [ ] (right select button) to stop the printing.
Media feed
direction