Back to top 2 Operation and Confi guration
S84NX/S86NX Service Manual
18
2.2.5 Clone
Copy the current printer settings and installed data to the USB memory.
Select [Tools]
>
[Clone].
CAUTION
Available only if you have installed the USB memory.
Be sure to perform a virus check for the USB memory before connecting the USB memory to the
printer.
Note
Use the clone confi guration when the printer will be replaced with a new printer, or when you set up
multiple printers with same settings.
The setting items are as follows:
Excl. LAN/Wi-Fi/IP
Copy the printer settings and data, excluding network information, to the
USB memory. This is useful when you set up multiple printers already
confi gured for network with the same printer settings.
Incl. LAN/Wi-Fi
Copy the printer settings and data, including network information
(excluding the IP address), to the USB memory. This is useful when you
set up multiple printers to be connected to the same network with the
same printer settings.
Incl. LAN/Wi-Fi/IP
Copy the printer settings and data, including network information (with
the IP address), to the USB memory. This is useful when carrying over
the settings of the printer to be replaced to a new printer.
To Next Page
Loading...