SATO S84NX - Wifi Ex-Setting

Back to top 2 Operation and Confi guration
S84NX/S86NX Service Manual
27
2.3.4 WiFi Ex-Setting
Select [Tools]
>
[Service]
>
[WiFi Ex-Setting].
Set the advanced functions for the wireless LAN.
Shows only if you have installed the optional wireless
LAN.
* Shows only if the wireless LAN module is W-LAN.
The installed wireless LAN module is displayed in
Wi-Fi Module in the Information menu.
The setting items are as follows:
Wi-Fi Region Set the region of the wireless LAN.
Wi-Fi Roam Adjust Adjust the threshold level for low RSSI roaming of the wireless LAN.
Supplicant Timeout Set a period of time for the EAP authentication timeout.
KeepAlive Set the interval for sending a KeepAlive packet to a connected device.
AP scan Interval Set the interval for scanning access points.

Wi-Fi Region
Set the region of the wireless LAN.
Shows only if you have installed the optional wireless
LAN.
Select the region (frequency band) from the list.
NOTE
• Do not set to a region other than where the
product is to be used.
• The setting will be eff ective after you power on
the product again.