SATO S84NX - Replacing the Timing Belt; Replacing the Timing Belt of Gearbox

Back to top 4 Replacement
S84NX/S86NX Service Manual
105
4. 7 Replacing the Timing Belt
4.7.1 Replacing the Timing Belt of Gearbox
Procedure Reference
1
Open the rear housing covers of the product.
Refer to 4.2.1
2
Remove the gearbox from the product.
Refer to 4.4.8
Step 1
Step 2
3
Loosen the screw (
1
) of the tension link.
NOTE
• Do not remove the screws.
4
On the gear side of the gearbox, remove the e-ring (
2
) using a slotted screwdriver.
Then remove the gear (
3
) and timing belt (
4
).
3
4
2
1