SATO S84NX - Rfid

Back to top 2 Operation and Confi guration
S84NX/S86NX Service Manual
23
2.3.3 RFID
Select [Tools]
>
[Service]
>
[RFID].
Set the functions for RFID.
Shows if you have installed the optional RFID kit.
The setting items are as follows:
RFID mode Enable or disable the RFID mode.
Module Show the type of RFID module installed on the product.
Region
Set the region where you use the product.
* Shows only when you have installed the UHF RFID module.
Inventory Check
Enable or disable the inventory check function.
* Shows only if you have installed the UHF RFID module.
Inventory Timeout
Set the timeout period of the inventory check.
* Shows only when you have installed the UHF RFID module.
Verify Enable or disable the verifi cation of data written on the tag.
PREND Type 3/4 Set the external output signal of the PREND.

RFID mode
Enable or disable the RFID mode.
When RFID mode is set to Enabled, RFID menu is
displayed on the Interface menu.
The options are as follows:
• Enabled: Enable the RFID mode.
• Disabled: Disable the RFID mode.