Back to top 2 Operation and Confi guration
S84NX/S86NX Service Manual
24
Module
Shows the type of RFID module installed on the
product.
Region
Set the region where you use the product.
Shows only when you have installed the UHF RFID
module.
Select the region (frequency band) where you use
the product from the list.
Inventory Check
Enable or disable the inventory check function.
Shows only when you have installed the UHF RFID
module.
The options are as follows:
• Enabled: Perform the inventory check of the
RFID tag. The product checks the
taken tag number before writing to
the tag. An error occurs when the
number is other than one.
• Disabled: Do not perform the inventory check
of the RFID tags.
To Next Page
Loading...