SATO S84NX - Replacing the W-LAN Kit

Back to top 5 Installation of Options
S84NX/S86NX Service Manual
116
5. 1 Replacing the W-LAN Kit
1
Loosen and remove two fl at-head screws (S1)
at the top of the rear cover, then remove another
two pan head screws (S2) at the rear.
S1
S2
S2
S1
2
Open the interface side of the rear housing cover (
1
), then open the other side that has a
fl ap on the rear housing cover (
2
).
1
2
Flap