S84NX/S86NX Service Manual
143
Back to top 6 Troubleshooting
Error Number Type of Error Error Icon LED Buzzer
1136
Label Sensor Cover Open Light in red
Short
sound,
3 times
Message Label sensor cover is open. Close label sensor cover.
To clear the display Lock the feed roller and media sensor assembly.
Causes
• The feed roller and media sensor assembly are unlocked.
• The sensor for detecting the open/close status of the media sensor
assembly is defective.
Countermeasures
• Unlock the feed roller and media sensor assembly once, and then lock
them again.
1141
Printing was aborted halfway Light in red
Short
sound,
3 times
Message Please feed and remove the label
To clear the display
Press the left select button (OFFLINE) or LINE button to switch to Offl ine
mode.
Causes
In dispense & print mode, printing was interrupted by a cancel operation or
error.
Countermeasures
Press the left select button (OFFLINE) or LINE button to switch to Offl ine
mode, and then press the button to feed and eject the labels that have
fi nished printing part way.
To Next Page
Loading...