Back to top 4 Replacement
S84NX/S86NX Service Manual
96
4.5.5 Replacing the Top Cover Sensor
1
Open the top cover (
1
) of the product.
NOTE
• Open the top cover fully to prevent accidental drop
of the cover.
1
2
Remove three screws (S7) and remove the USB unit (
2
).
S7
2
Notes on assembling
• Attach the USB unit so that the SENSOR SW BR cable (
3
) is
not pinched.
3
3
Disconnect the SENSOR SW BR cable connector (
4
).
4
To Next Page
Loading...