SATO S84NX - Final Check

S84NX/S86NX Service Manual
52
Back to top 3 Checking and Performing Printer Adjustments
3. 4 Final Check
3.4.1 Checking Test Print with Factory Settings
1 min
After fi nishing work, make sure that you haven’t accidentally changed something.
1
All setting items
2
Print position
3
Stop position
Note
If there is an item unable to check, check it with the internal setting information, as required.
3.4.2 Checking the Customer’s Layout
1 min
Ask the customer to print out with actual data, and make sure that there is no problem with the layout.
3.4.3 Checking Barcode Scan
1 min
When the customer’s layout includes barcodes, QR codes, etc., perform readout checks to make sure
that a scanner can read them correctly.