SATO S84NX - About [Tools] menu

Back to top 2 Operation and Confi guration
S84NX/S86NX Service Manual
13
2. 2 About [Tools] menu
Click on the items in blue to link directly to the details of the selected items.
Tools Description
Test Print
Factory Perform the factory test print.
Confi gure List Print the product setting information.
Confi gure QR Print the confi guration information with a QR code.
Paper Sensor Print the detection result of the media sensor level.
Head Check Perform the head check print.
HEX-Dump
Save the hex dump print data or dump data from the receive
buff er to the USB memory.
Reset Reset the printer settings.
Profi les
Delete Delete the profi le.
Load Load the profi le.
Save Save the current profi le settings by overwriting.
Start with Select the profi le to be loaded at startup.
Service
Refer to
2. 3 About [Service Mode]
Factory Not available
Certifi cates Set the WLAN authentication.
Barcode Checker Set the barcode check function using a barcode checker.
Clone
Copy the current product settings and installed data to the
USB memory.
* Available only if you have installed the USB memory.
Clone Notice Setting Enable or disable the Clone Notice.
Support Info
Save various information about the product in a text fi le to the
USB memory.
* Available only if you have installed the USB memory.
Logging Function Enable, save, or delete the log information.
Startup Guide Enable or disable the startup guide.