SATO S84NX - Replacing the Gearbox

Back to top 4 Replacement
S84NX/S86NX Service Manual
86
4.4.8 Replacing the Gearbox
1
Open the rear housing covers of the product.
Refer to
4.2.1 Opening the Rear Housing Cover
2
Disconnect the motor cable (
1
).
3
Remove three screws (S15) and remove the gearbox (
2
).
Fastening the ground wire together
S15
S15
S15
1
2

From here, assembling procedure
4
Assemble the parts in the reverse order of the disassembly procedure.