SATO S84NX - Sensors Replacement

Back to top 4 Replacement
S84NX/S86NX Service Manual
85
7
On the rear of the product, remove three screws (S4).
8
Then carefully remove the frame of the print head assembly (
2
).
S4
S4 S4
2
9
On the head lock lever (
3
), remove the hex
socket set screw (S14) using an Allen wrench.
Then remove the screw (S13) and remove the
head lock lever (
3
).
S14
3
S13
10
Loosen three screws and remove the UW ribbon roller and RW ribbon roller.
S3
UW Ribbon Roller RW Ribbon Roller

From here, assembling procedure
11
Assemble the parts in the reverse order of the disassembly procedure.